Integrity™ Encore!™ aluminum hand railing features our concealed fastener system (CFS) rails that hide all fasteners for a beautifully sleek look for your deck, balcony, patio or porch. The top and bottom horizontal rails are totally enclosed to provide incredible strength, meeting or exceeding most standardized building safety codes*. Innovative, stylish and durable, Encore!™ is available in heights of 36” and 42”, with four attractive grab rail options!
Integrity Encore!™ Hand Railing Panels
Encore!™ hand railing panels are a two-rail system engineered with SmartRail™ CFS to provide incredible strength. This concealed fastener system (CFS) hides all fasteners for a beautifully sleek look.
|
||
|
Top Rail Profiles
Any of the four Encore!™ hand railing top rail design profiles can be purchased separately by-the-foot in one-foot increments up to 10′ long. This top rail is designed as a concealed fastener system (CFS), with the outer profile snapped together with an inverted Premier™ grade horizontal SmartRail™. Sold together as a unit here, either component can be quoted separately upon request. Available in any of our standard colors. |
||
|
Bravo!™ Balusters
Standard Encore!™ hand railing panels are constructed using 3/4” square vertical pickets. These pickets can be upgraded to a 3/4” Bravo!™ Baluster for any Encore!™ panel style. The Bravo!™ Baluster system is available for both 36” and 42” high panels in all standard colors. |
||
 |
Encore!™ Lower Rail
The lower rail of any Integrity Encore!™ hand railing panel is actually Premier™ grade SmartRail™ Concealed Fastener System (CFS) and can be ordered separately by-the-foot. See SmartRail™ for details. |
|
|
Panel Mounting Brackets
Integrity Encore!™ hand railing panels are installed by being attached to blank posts using mounting brackets. These rail mounting brackets are unique and not interchangeable with our fence rail mounting brackets. Based on your requirements, order any of the following types in any of our standard colors: Encore!™ Top Rail Brackets with or without Tabs*
Encore!™ Lower Rail Brackets with or without Tabs*
*When ordering mounting brackets for the top rail, you must indicate the top rail design profile. Also, when ordering any Encore!™ rail mounting bracket, you must specify ”with tabs” or ”without tabs”. Visit our Encore!™ link for more information. |
||
|
Boss Screw Posts
The internal corners of these unique posts are designed to accept screws for the attachment of a Boss Screw Flange. Specifically designed for use with our Encore!™ Hand Railing Collection, Boss Screw Posts can be punched to accept the horizontal rail of all Premier™ grade fence panels but are most often ordered as blank posts and used in conjunction with mounting brackets. Available in 2 1/2″ square x .100” or 3” square x .125” in four standard lengths, 37”, 43”, 47”, and 53” in all standard colors. Standard caps are always included with every Integrity post. |
||
|
Boss Screw Post Flanges
Hide the fasteners with these innovative flanges! Boss Screw Post Flanges are designed to be used only in conjunction with complementing Boss Screw Posts, which are engineered to accept screws for the attachment of this flange. Optional welding is available for a minimal upcharge. Available in all standard colors. |
||
|
Decorative Aluminum Columns
Designed to wrap around existing posts, these decorative aluminum columns snap together to cover unsightly concrete or weathered wooden posts. Give your porch a face-lift with this attractive Encore™ innovation. Available in 6” or 8” square sizes in 8′, 10′ or 12′ lengths. Can be trimmed shorter when installing, available in all standard colors. Caps and skirts sold separately. |
||
 |
Decorative Aluminum Column Skirts
Dress up decorative aluminum columns with base skirts for a finished, professional look. Sold separately to fit either 6” or 8” column sizes. Available in all standard colors. |
|
 |
Decorative Aluminum Column Caps
Top off decorative aluminum columns with these attractive caps for a finished, professional look. Sold separately to fit either 6” or 8” column sizes. Available in all standard colors. |
|
 |
Grab Rail
Any of the four Encore!™ hand railing top rail design profiles can be purchased as a grab rail system, sold by-the-foot in one-foot increments up to 10′ long. Encore!™ Grab Rail is an independent rail – not a panel – and is intended for wall mounting using special wall mounting brackets (see below). All standard Integrity colors are available. |
|
|
Grab Rail Wall Mount Bracket
Use this special wall mounting bracket exclusively for Encore!™ Grab Rail. Designed to securely attach to the bottom of the grab rail, adding grab rail to a wall adjacent to a set of steps becomes a breeze! |
||
 |
Gate Specs and Hardware
Walk gates for Encore!™ Hand Railing are available in any top rail profile in opening widths of 3′, 3 1/2′, or 4′. Arched feature not available. Gate hinges and latches sold separately. All standard Integrity colors are available. |
