Aluminum Fencing Made Simple

Purchasing an aluminum fence does not need to be a difficult process.  In fact the purchase of a fence for the perimeter of a home’s yard is something that is quiet normal for most homeowners.  The dream of a white picket fence is now easier than ever to have and without the maintenance of yesteryears ideal white wooden picket fences.  With aluminum fencing you can have the fence of your dream installed within weeks, virtually maintenance free.

Determine Your Aluminum Fencing Needs

The first step in purchasing an aluminum fence is deciding what purpose the fence will serve.  Are you in need of a perimeter fence that will keep your kids and pets in and others out?  Do you need an aluminum fence for the perimeter of your swimming pool to ensure that without adult supervision young ones aren’t able to access the pool?  The reason you are purchasing the fence will allow you to adequately determine the grade of fencing needed as well as the specific height to purchase.

Before You Purchase Aluminum Fencing

Planning is essential before purchasing an aluminum fence.  It is penitent that you take into consideration a variety of things not only with the design and layout of the fence but also the installation.  Before a fence is purchased it is important that you check with local ordinances placing restrictions on fencing in your area.  Some cities and states have specific regulations in regards to fencing materials, heights and styles that are allowed.  If you live in an area with a homeowners association meet with them as well to discuss your plan and ensure it meets with community regulations.

Hire a property surveyor to determine your property lines.  The last things you want to do are design and order a fence for the property lines you measure that aren’t really yours.  Redesigning a fence once you have ordered all the specific pieces is not simple or fun.

It is your responsibility to ensure that all underground utility lines have been accounted for.  If you are digging and hit a gas line you are responsible.  It is better not to hit anything in the first place because repairs only add time to the task of installing your aluminum fence.

Physically draw out and place perimeter markings for the fence.  Use stakes and string to visually place the fence.  From here you will want to use larger marking points to place the gates and agreed upon access points.  By simply using a few stakes and some string you will get a visual on your fence.  This will help to ensure that any obstacle is considered prior to ordering your new aluminum fencing.  You will see if a tree is in line with the perimeter you were consider.  This will allow you the ability to either choose to cut the tree down or place the fence further in or outside of the trees range.  It will also help show you were different slopes are in the space.  This will allow you to order rackable aluminum fence for those locations.

Ordering Aluminum Fence Panels, Posts, Hardware and More

Online ordering of your new aluminum fence is easier than ever with the help of design studios and expert customer service representatives.  The best online companies only hire representative who have experience within the industry.  This allows them to better understand your needs and how their product can help to meet them.

Installing Aluminum Fences

The process of installing aluminum fencing has been simplified over the years.  Aluminum fencing panels are now shipped fully assembled.  Easy step by step, detailed instructions and a top notch customer service team to fall back on to aide you will ensure your aluminum fence is installed in a weekend.

iFence USA offers the widest variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for exceptional value and installation advice, you’ll benefit by buying wholesale aluminum fences shipped factory-direct to your home or business anywhere in America from www.iFenceUSA.com!

Finding The Right Aluminum Fence For Your Needs

Choosing an ornamental aluminum fence comes with so many choices that one can be quickly overwhelmed.  Aluminum fencing comes in several different grades, styles, colors, heights and decorative options.  When you begin look for a company that offers a lifetime warranty on their aluminum fencing for defects against cracking, chipping, or peeling.  Start by choosing to purchase aluminum fencing from an online supplier that stands behind their products with a warranty.  A warranty guarantees a superior product with a superb finish.

Choose the right grade of aluminum fencing

Every online supplier will offer different grades of aluminum fencing for sale.  Breaking it down into simple form there are basically four grades of fencing.  With each increase in grade you will notice a significant change in the thickness and strength of the fence.  Residential grade fence is perfect for use to secure the perimeter of your landscape while containing small pets and children.  Commercial grade fencing is when you need a bit more home security or fencing for your business.  Industrial grade fencing is best for more challenging applications in industrial and commercial locations.

www.iFenceUSA.com offers the following options in aluminum fence grades:

  • Classic Fence – Residential Grade
  • Premier Fence – Commercial Grade
  • Ultimate Fence – Industrial Grade
  • Resort Fence – Swimming Pool Grade

Choose the right style of aluminum fencing

Finding the right style aluminum fence for your home is easier then every.  Many online suppliers offer design studios within their websites.  You will upload a picture of your space with the landscapes perimeter measurements.   From this you can get a visual image of what different fence styles and colors will look like in front of your home.  Choose a supplier with many styles of fencing to choose from.  Don’t limit yourself to online suppliers with mediocre choices.  Most reputable companies offer at least ten different styles to choose from.

www.iFenceUSA.com offers 18 different style options in aluminum fencing:

  • Sanibel
  • San Marino
  • Ventura
  • Boca Grande
  • New Orleans
  • Excelsior
  • Santa Monica
  • Bella Vista
  • Mission Point
  • Napa Valley
  • Amarillo
  • Bella Terra
  • Charlemagne
  • Camelot
  • Camarillo
  • Providence
  • Castile
  • Valencia

Choose the right color of aluminum fencing

Choose the color of your fence wisely as you can’t change it in a month if you don’t like it.  Aluminum fencing comes with an advanced power coated finish that helps to prevent rust and is designed to require very little maintenance with a pristine finish for the lifetime of the fence.  If you were to paint or manipulate the color of your fence in any manner you will void the warranty and your fence will no longer remain maintenance free.  Paint require a lot of upkeep which takes away one of the biggest advantages in aluminum fence, being virtually maintenance free.

www.iFenceUSA.com offers various color options in aluminum fencing:

  • Matte Bronze
  • Bronze
  • White
  • Matte White
  • Green
  • Beige
  • Matte Sandstone
  • Black
  • Matte Black

Choosing the right height and width of aluminum fencing

The height you choose for your aluminum fence will depend on several things including the level of protection you want.  It is also dependent upon the grade of fencing you choose.   For instance, commercial and industrial fencing is offered in taller height because of its general purpose is security.  Residential fencing is usually offered up to 5 feet because it is generally used to keep children and pets in while keeping others out.  Pool fence panels are usually 4.5 feet tall to correspond with B.O.C.A. requirements.

The widths of the panels needed are dependent upon the layout of the fence within your space.  If you have a hill in your yard you may need a section of rackable aluminum fence to compensate for the grade in the lawn.  When you are designing the fence you can vary the width if needed.  The most popular option, the one that most aluminum fence panels are sold in is 6 foot.

www.iFenceUSA.com aluminum fencing height options:

  • 3 Foot
  • 4 Foot
  • 5 Foot
  • 5 Foot
  • 6 Foot
  • 7 Foot
  • 8 Foot

www.iFenceUSA.com aluminum fencing width options:

  • 3 Foot
  • 4 Foot
  • 5 Foot
  • 6 Foot
  • 7 Foot

Choosing the decorative options of aluminum fencing

Some styles of fencing offer decorative options without any further customization.  Others offer the choice to customize the panels with ornamental options such as decorative finials, scrolls or circles.  The ornamental options in don’t offer anything to improve the quality of the fence; they are used strictly for visual appeal.  These options add to the cost of your aluminum fencing but for many people the desired effect visually is worth it.

www.iFenceUSA.com offers various ornamental options in aluminum fencing:

  • Speer Top Finials
  • Excelsior Finials
  • Fleur de Lis Finials
  • Butterfly Scrolls
  • Circles

iFence USA offers the widest variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for exceptional value and installation advice, you’ll benefit by buying wholesale aluminum fences shipped factory-direct to your home or business anywhere in America from www.iFenceUSA.com!

Crucial Beginning Steps In The Installation Process Of Aluminum Fencing

Adding security and privacy to your home environment is something that most homeowners are interested in.  We look for ways to layout our landscape to provide barriers to outsiders to show that the there is a division between one property from another.  We seek privacy and seclusion when we are enjoying time with our family within our homes or yards.  One sure fire way to get both safety and solitude is with the addition of an aluminum fence around the perimeter of your landscape.

Installing aluminum fencing is no small task.  There are many considerations to ensure that your aluminum fence is designed, ordered and installed properly.  Below you will find a few concerns that need to be addressed once you have decided an aluminum fence is to be installed.

It is crucial that you check with local authorities to determine if there are any special zoning laws about fencing in your area.  Are their height limitations or boundary requirements surrounding the installation of your fence?  You will want to check with your local HOA about neighborhood guidelines that restrict the fence materials, colors, height requirements and more.  Now is the time that you have your yard surveyed as well.  The last thing you want to do is spend time and money on installing a fence only to realize it is not within your property lines.

Don’t overlook calling utility companies before you design, order, purchase and install a fence.  You do not want to overlook this step if you accidentally hit a utility line it can be incredibly dangerous and expensive to fix.  The posts need to be placed a minimum of thirty inches deep so you don’t want to run the risk of hitting a pipe or underground wire when digging.

Consider a mock up of the fence before you order or install it.  Online aluminum fence companies often have design centers on their sites. What this does is take a look at your property via pictures and measurements that have been taken and allow you to visualize the fence in your space.  From here you will have a better idea of the layout of the fence.

Sticks should be put in to place where you plan on putting the posts.  From here you will want to tie a piece of string between the sticks to ensure exactly where the fence will stand.  You will be able to see if your design needs any last minute redesigns.  This technique will allow you to account for possible differences in the height of the landscape as well as any unforeseen obstacles that were not previously considered.

Installing an aluminum fence to your landscape can add safety and solitude to your home environment.  If you are planning on installing your fence it is important to plan ahead. Follow the advice above as you plan for the installation of your new fence.

iFence USA offers the widest variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for exceptional value and installation advice, you’ll benefit by buying wholesale aluminum fences shipped factory-direct to your home or business anywhere in America from www.iFenceUSA.com!

Aluminum Fence Installation With Ease

In our first installment on aluminum fencing installation we talked a lot about how easy the process can be.  The more detail you put into the planning process the easier the actual labor of installing the fence will be.  Aluminum fence is lightweight and easy to maneuver which helps make it so simple to position.  In our last piece we went into specifics on how detailed planning and patience make putting your fence in a whole lot easier.

The next phase to in the installation process after you have properly planned is the process of preparing the landscape for the new fence.  You must first mark the placement of the aluminum fence.  This can easily be done by hammering in metal stakes and stringing a line between them.  Make the line as taut as possible.  From here marking the location for the posts is the next step.  Adjust the location of the post holes according to the size of the panel.  Measure twice and cut once is a key element in setting the location of the posts.

The string that is already staked out will help guide you throughout the entire process.  It will provide you with a straight edge reference point.  Stay consistent in the placement of your posts.  None of the posts should touch or push your string as this will push the straight edge in one direction or the other which will mess up the continuity of your fence line.

Dig a few holes at a time; don’t dig them all at once.  The holes should be about six inches wide and between twenty four to forty two inches deep.  Again don’t dig all of the holes at once, dig as you go.  Check to ensure that the posts are positioned plumb and true.  It is important that the post is level as the concrete sets.  If they become unlevel your gate may not function as it should.

The actual panel installation is quick and easy.  Start with attaching one section of fence.  This can be done by sliding the notched horizontal rail of the fence into the punched hole of the post.  A screw through the post into the rail will securely attach the rail to the post.  Continue to level each post and pour concrete into each hole that you dig.  It is critical that you level one post and one panel at a time to complete the entire section before moving on.  To truly secure each post add dirt over the concrete and pack it in tight.

As you move on be sure to check the previous sections.  Add on a section of fence and additional posts while continuing to go back to sections of aluminum fence panels that are in place and make sure they stay level and maintained.  Tweak as you go and adjust as needed.  Not only should you use tools to make sure the fence is in level but also be sure to use your sight and personal judgment to adjust as needed.

If the fence ends on a corner it is important to remember that the horizontal rails of the next panel is notched to fit directly into the post.  Once each post is in place and the fence panels are set into place the post caps need to be snapped into place.  You may need a rubber mallet to place them but will not need screws to keep them in place.  Be gentle if you use a mallet so that you don’t damage the post cap material.

Next you will install the gate.  Make sure it is attached and latches correctly.  The gate may take a bit of patience to get into place and working correctly.  Make sure the swinging of the gate is in the direction you want it to be.  Install the hinges using screws and level out the gate.  After the cement is dry and only then is it okay to start using the fence.

With the right tools, a lot of patience and solid directions your aluminum fence should be in place, installed and ready for use after ten to twenty hours after you begin putting it in to place.

iFence USA offers the widest variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for exceptional value and installation advice, you’ll benefit by buying wholesale aluminum fences shipped factory-direct to your home or business anywhere in America from www.iFenceUSA.com!

Installing An Aluminum Fence With Ease

There is nothing to stress about when it comes to the installation of aluminum fencing. It is the easiest material in fencing to install for several reasons. Even though aluminum is one of the most durable materials it still remains light weight. This makes maneuvering the fence panels simpler. Digging holes is trouble free as the posts used to install aluminum fencing are smaller both wood and vinyl posts. The panels come preassembled and since they are lightweight it moves the project along at an efficient pace. With a short list of tools your fence installation project should only last between ten to twenty hours overall.

When you begin it is important to consider that the project is not something you should rush through. It is not a process that you should look at as something to get over with. A fence should be installed with patience. Take your time to measure twice and cut once.

After you have called to ensure your fence is meeting local and state regulations it is time to start prepping the work site. Before you begin digging you will want to call the local utility companies to come out and identify where all of the underground utilities are located. Next make sure that you have identified your property lines. If you are uncertain it is important to have the property surveyed. You will be held liable if the fence is installed in the wrong location. You will be responsible for the expensive of moving the fence.

If your alumninum fence is being installed around an in ground swimming pool it is crucial that you meet with the pool installer for assistance. They can also help you to plan the installation of your fence around underground lines and pool equipment. You want the lines for the pool to be accessible without having to uproot your entire fence if repairs are needed. Removing one single fence panel is not the end of the world when looking to repair underground lines whereas an entire fence would be overwhelming. Unpack your fence and layout out the materials where they will be installed. Mark off areas that slope and that will require rackable panels. This should be done before you begin installation to ensure the right pieces are in the proper locations.

In our next installment we will talk more about the actual installation process. Half of the installation process is planning half is doing. When installing aluminum fence panels the more you plan the easier the doing will be.

iFence USA offers a variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for value and installation advice, you’ll benefit by buying aluminum fences shipped factory-direct fromhttp://www.iFenceUSA.com!

Why Should You Choose Aluminum Fencing

There are a number of reasons that people look into purchasing a fence.  New construction, replacing an existing fence or to enclose a new swimming pool are all some of the motivations that cause homeowners to look into aluminum fencing.  Before the creation of the internet the typical way to purchase fencing was to get multiple quotes from contractors found in the phone book.   Now there is a simpler way; homeowners can quote and order aluminum fencing online, never having to leave the comfort of their own home.

Ordering aluminum fencing online has become such a popular option for a million reasons.  One of the main reasons that online purchases have become so popular is the lower overhead that comes with owning an online company verse a store front.  Another motivation to order online is the convenience that it offers.  You can shop anytime, put an order together and purchase when you are ready to have it shipped. Online support is offered through several methods as well; you may call, email or use online chat methods to get immediate answers regarding your order.

Aluminum fencing has increased in popularity over the past decade.  This is due in part to the growth in number of in ground swimming pools that are installed by homeowners.  Safety regulations make it a requirement to install a safety fence around the pool area.  Aluminum fencing is a popular option because it can be ordered to meet B.O.C.A standards, it is lightweight, maintenance free and easy to install.  Below are some additional incentives to consider when looking into aluminum fence.

The maintenance aspect of aluminum fence is a draw to many homeowners looking to install a fence.  Aluminum is powder coated and finished with a baked enamel coating.  It does not bend, twist or distort shape over time unlike chain link and wood may.  Aluminum stands up to the weather: intense heat or extreme cold.  When you make an aluminum fence purchase you are basically purchasing a fencing that is maintenance free.

Another fantastic feature about aluminum is that is never rusts.  Most aluminum fencing manufactures offer lifetime warranties against chipping, cracking, peeling and fading of their products.

A few other benefits of aluminum fence are that it is not treated with chemicals and is therefore good for the environment as well.  The fencing comes in lightweight panels that are shipped pre-assembled.  The aluminum is also easy to cut if installation adjustments are needed.  Otherwise installation is as simple as setting the posts and inserting the panels into them.

If you look at the benefits and drawbacks of fencing materials you will see that the aluminum fencing offers such a wide range of benefits over the competition.  Whether you are a pool contractor, building contractor, architect, landscaper, or do it yourself homeowner you will find help online with the planning, designing, ordering and installation of your aluminum fence.

iFence USA offers the widest variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for exceptional value and installation advice, you’ll benefit by buying wholesale aluminum fences shipped factory-direct to your home or business anywhere in America from www.iFenceUSA.com!

Aluminum Fencing Continues To Be A Popular Option In Metal Fencing

There are several options in metal fencing.  The most popular option continues to be aluminum fence panels, a lightweight, rust free and low maintenance option which makes it a popular metal fencing option.  Aluminum fence is perfect for enclosing your entire yard or a section of your yard such as an in ground pool.  Whether you are looking for pool fencing or decorative fence aluminum is the perfect material for a variety of purposes.

Homeowners choose to install fencing for a variety of reasons.  The aluminum fence panel design that you choose will depend on the reason you are looking for fencing in the first place.   For instance, if you are choosing to install a fence around your yard to contain pets you will want to choose a panel that offers puppy pickets or extreme spacing.  Puppy pickets are an additional shorter picket to ensure that the animal is not able to squeeze through the fence.  Extreme spacing in aluminum fencing is an extra picket between the normal pickets that extends all the way to the top.

Aluminum fencing offers numerous benefits over competitive materials such as wood, vinyl, wrought iron or chain link.  Aluminum fences are covered with a powder coating that provides a maintenance free, smooth finish with an attractive appearance.  The powder coating also helps prevent corrosion and rust, making aluminum a maintenance free fencing option.  This also helps make it affordable.  The extra expense up front over other fence materials is easily recouped when you look at the money that is required to maintain them.

When looking for a fence that is customizable aluminum is the most appropriate option.  With aluminum you can choose from a number of styles of decorative and ornate aluminum fencing panels.  On top of choosing a style that fits your homes décor you can customize it with butterfly scrolls, historical finals, finials that are pressed and even spacing between the pickets.  You can customize aluminum fence panels to meet your need.

In order to get the most out of your aluminum fence it is important to plan ahead.  The winter season is the perfect time to start preparing for the installation of your aluminum fence in the spring.  Take the measurements of the space you are looking to install the fence and contact a fencing expert.  Consult with an aluminum fencing expert now to prepare your fence order.  This will ensure that your fencing is all set to be processed, the necessary materials are in stock and that the order is ready to ship when you are ready to install it in the spring.

iFence USA offers a variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for value and installation advice, you’ll benefit by buying aluminum fences shipped factory-direct from http://www.iFenceUSA.com!

Winter Is the Perfect Time To Plan For Your New Aluminum Fence

Winter is the perfect time of year to start planning for your aluminum fence.  Taking time to plan for the purchase now will ensure that you are settled on the details and your order is complete to be shipped at a later time of your choosing.  Working with an online aluminum fence supplier that offers full service throughout the planning, design, ordering and installation process; thus saving you time and money while ensuring a successful project.  Don’t gamble with shopping carts when you can work with companies that provide expert customer service while still enabling you to order online.

One of the most important things you can do is familiarize yourself with the variety of aluminum fence panels and options that are available.  This will help to ensure that your expectations are obtainable. Aluminum fencing comes in a several different grades.  You can choose from residential, pool, commercial and industrial grade fence panels.  The styles of aluminum fence available also vary a great deal.  It is nice to understand, before you are ready to order, the options available and what upgrades are available with each style.

When you have come to a basic understanding of the style and grade of fencing you are looking for the next step is to begin laying out the area that is to be fenced in.  This requires taking time to measure the space and to plan for gate entrance and exits.  You need to look at the existing landscape as well.   It is crucial that you accommodate landscape features that are permanent.  Make a simple drawing of the area; include measurements and details of the space.  This will not only be useful for you but to the fence expert that will assist you.

From your drawing the process of determining the needed fencing materials will be simplified.   From your drawing and measurements you can determine how many fence panels, end posts, transition posts, line posts and corner posts you will need.  You need to consider the width of the gates you want to install as well.  This is where the project tends to become overwhelming for beginners.  When you work with an online company that offers a full service approach you will be able to fax or email them your drawing.  They will then be able to better assist you in preparing to order your new aluminum fence.

Planning for your new fence is takes as much preparation, if not more, than the installation process.  If you take the time now to thoroughly plan and order the correct aluminum fence panels, posts and hardware your installation project will be flawless.

iFence USA offers the widest variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for exceptional value and installation advice, you’ll benefit by buying wholesale aluminum fences shipped factory-direct to your home or business anywhere in America from www.iFenceUSA.com!

Winter Planning For Your Aluminum Fence Project

Winter is the perfect time to plan for your aluminum fencing project. Winter preparations ensure that your aluminum fence panels, posts and hardware are available to be shipped when you are ready for installation in the Spring.

Start Planning With A Simple Sketch Today!

Drawing

Online tools available from iFenceUSA today at http://www.ifenceusa.com/smarttools.php

Why Choose iFenceUSA Over Other Online Fence Companies?

Our mission in offering aluminum fencing is to empower our consumers with all the information they need to help them design, order and install their new aluminum fence panels!

At iFenceUSA we offer a full service approach to aluminum fencing. Our fence experts are on call to assist you throughout the entire planning process. Let our knowledgeable team assist you in designing, ordering and installing your aluminum fence panels today!

Don’t gamble with a shopping cart – talk to helpful experts instead!

Call today – (800) 762-8876!